When consumables matter.

Large Volume Protein Labeling Kit RED-NHS 2nd Generation (Amine Reactive)
This Large Volume Protein Labeling Kit RED-NHS 2nd Generation kit increases data quality and enables affinity studies with previously challenging targets by generating higher binding amplitudes and improved signal-to-noise ratios. It contains all required reagents for labeling and dye removal. The dye carries a reactive NHS-ester group that reacts with primary amines (lysine residues) to form a covalent bond. The kit is optimized for proteins with a molecular weight higher than 5 kDa and concentrations between 2 and 20 µM. RED dyes are suited for Monolith NT.115 series and Monolith NT.Automated instruments with a RED detector (Nano and Pico) and Dianthus NT.23 series. Contents require storage at 4 °C and -20 °C.

Large Volume Protein Labeling Kit RED-MALEIMIDE 2nd Generation (Cysteine reactive)
This Large Volume Protein Labeling Kit RED-MALEIMIDE 2nd Generation kit increases data quality and enables affinity studies with previously challenging targets by generating higher binding amplitudes and improved signal-to-noise ratios. It contains all required reagents for labeling and dye removal. The dye carries a reactive maleimide group that reacts with cysteine residues to form a covalent bond. The kit is optimized for proteins with a molecular weight higher than 5 kDa and concentrations between 2 and 20 µM. RED dyes are suited for Monolith NT.115, Monolith NT.Automated instruments with RED detector (Nano and Pico) and Dianthus NT.23 series. Contents require storage at 4 °C and -20 °C.

Large Volume His-Tag Labeling Kit RED-tris-NTA 2nd Generation
This Large Volume His-Tag Labeling Kit RED-tris-NTA 2nd Generation kit increases data quality and enables affinity studies with previously challenging targets by generating higher binding amplitudes and improved signal-to-noise ratios. The kit is used for site-specific and purification-free labeling of His-tagged (6xHis) proteins and peptides. The kit can be used with purified as well as crude samples (e.g. cell lysate) and contains material sufficient for 3840 single-point MST measurements. RED dyes are suited for Monolith NT.115 and Monolith NT.Automated instruments with RED detector (Nano and Pico) and Dianthus NT.23 series. Store at -20 °C.

Buffer Exploration Kit
Your mission is to explore buffer conditions for biophysical interaction assays MST and TRIC, protein stability, purification, and storage. Start your exploration with this 96 deep-well plate containing 1 mL of each buffer condition per well.

Dianthus 384-well plate, barcoded - Single plate
Single 384-well barcoded plate for TRIC measurement with Dianthus system. Hard sided, black/black with clear bottom, 18-25 μL working volume.

Dianthus 384-well plates, barcoded - Package of 10
Rack of 10 384-well barcoded plates for TRIC measurement with Dianthus system. Hard sided, black/black with clear bottom, 18-25 μL working volume.

Dianthus 384-well plates, barcoded - Package of 40
Four racks of 10 384-well barcoded plates for TRIC measurement with Dianthus system. Hard sided, black/black with clear bottom, 18-25 μL working volume.

Monolith NT.115 Control Kit RED
Monitor the performance of the Monolith, or use when operating the system for the first time or when training new users. For Nano-GREEN/RED or Nano-BLUE/RED or Pico-RED detectors.

Monolith NT.115 Control Kit GREEN
Monitor the performance of the Monolith, or use when operating the system for the first time or when training new users. For Nano-GREEN/RED or Nano-BLUE/GREEN detectors.

Monolith NT.LabelFree Control Kit
Monitor the performance of the Monolith, or use when operating the system for the first time or when training new users. For LabelFree detectors.

Monolith Protein Labeling Kit RED-NHS (Amine Reactive)
Monolith Protein Labeling Kits contain all required labeling and dye removal reagents. The dye carries a reactive NHS-ester group that reacts with primary amines (lysine residues) to form a covalent bond. The kit is optimized for proteins with a molecular weight of more than 5 kDa and concentrations between 2 and 20 µM. The RED dye is suited for Monolith NT.115 series and Monolith NT.Automated instruments with a RED detector (Nano and Pico).

Monolith Protein Labeling Kit GREEN-NHS (Amine Reactive)
Monolith Protein Labeling Kits contain all required labeling and dye removal reagents. The dye carries a reactive NHS-ester group that reacts with primary amines (lysine residues) to form a covalent bond. The kit is optimized for proteins with a molecular weight of more than 5 kDa and concentrations between 2 and 20 µM. The GREEN dye is suited for Monolith NT.115 series and Monolith NT.Automated instruments with a GREEN detector.

Monolith Protein Labeling Kit BLUE-NHS (Amine Reactive)
Monolith Protein Labeling Kits contain all required labeling and dye removal reagents. The dye carries a reactive NHS-ester group that reacts with primary amines (lysine residues) to form a covalent bond. The kit is optimized for proteins with a molecular weight of more than 5 kDa and concentrations between 2 and 20 µM. The BLUE dye is suited for Monolith NT.115 series and Monolith NT.Automated instruments with a BLUE detector.

Monolith Protein Labeling Kit RED-MALEIMIDE (Cysteine Reactive)
Monolith Protein Labeling Kits contain all required labeling and dye removal reagents. The dye carries a reactive maleimide group that reacts with cysteine residues to form a covalent bond. The kit is optimized for proteins with a molecular weight of more than 5 kDa and concentrations between 2 and 20 µM. The RED dye is suited for Monolith NT.115 series and Monolith NT.Automated instruments with a RED detector (Nano and Pico).

Monolith Protein Labeling Kit GREEN-MALEIMIDE (Cysteine Reactive)
Monolith Protein Labeling Kits contain all required labeling and dye removal reagents. The dye carries a reactive maleimide group that reacts with cysteine residues to form a covalent bond. The kit is optimized for proteins with a molecular weight of more than 5 kDa and concentrations between 2 and 20 µM. The GREEN dye is suited for Monolith NT.115 series and Monolith NT.Automated instruments with a GREEN detector.

Monolith Protein Labeling Kit BLUE-MALEIMIDE (Cysteine Reactive)
Monolith Protein Labeling Kits contain all required labeling and dye removal reagents. The dye carries a reactive maleimide group that reacts with cysteine residues to form a covalent bond. The kit is optimized for proteins with a molecular weight of more than 5 kDa and concentrations between 2 and 20 µM. The BLUE dye is suited for Monolith NT.115 series and Monolith NT.Automated instruments with a BLUE detector.

Monolith His-Tag Labeling Kit RED-tris-NTA
The Monolith His-tag Labeling Kit is used for the site-specific, purification-free labeling of small amounts of His-tagged proteins with our RED dye. This kit can be used for the labeling of any protein or peptide carrying a polyhistidine-tag (His-tag). The kit contains everything required to perform labeling for 500 single-point MST measurements. Labeling can be completed in 30 min, no removal of excess dye is required.

Monolith Protein Labeling Kit RED-NHS 2nd Generation (Amine Reactive)
The Monolith Protein Labeling Kit RED-NHS 2nd Generation kit increases data quality and enables affinity studies with previously challenging targets by generating higher binding amplitudes and improved signal-to-noise ratios. It contains all required reagents for labeling and dye removal. The dye carries a reactive NHS-ester group that reacts with primary amines (lysine residues) to form a covalent bond. The kit is optimized for proteins with a molecular weight higher than 5 kDa and concentrations between 2 and 20 µM. RED dyes are suited for Monolith NT.115 series and Monolith NT.Automated instruments with a RED detector (Nano and Pico).

Monolith Protein Labeling Kit RED-MALEIMIDE 2nd Generation (Cysteine reactive)
The Monolith Protein Labeling Kit RED-MALEIMIDE 2nd Generation kit increases data quality and enables affinity studies with previously challenging targets by generating higher binding amplitudes and improved signal-to-noise ratios. It contains all required reagents for labeling and dye removal. The dye carries a reactive maleimide group that reacts with cysteine residues to form a covalent bond. The kit is optimized for proteins with a molecular weight higher than 5 kDa and concentrations between 2 and 20 µM. RED dyes are suited for Monolith NT.115 and Monolith NT.Automated instruments with RED detector (Nano and Pico).

Monolith His-Tag Labeling Kit RED-tris-NTA 2nd Generation
The Monolith His-Tag Labeling Kit RED-tris-NTA 2nd Generation kit increases data quality and enables affinity studies with previously challenging targets by generating higher binding amplitudes and improved signal-to-noise ratios. The kit is used for site-specific and purification-free labeling of His-tagged (6xHis) proteins and peptides. The kit can be used with purified as well as crude samples (e.g. cell lysate) and contains material sufficient for 500 single-point MST measurements. RED dyes are suited for Monolith NT.115 and Monolith NT.Automated instruments with RED detector (Nano and Pico).

SNAP-Tag® Labeling Kit RED 2nd Generation
The SNAP-Tag® Labeling Kit RED 2nd Generation contains all required reagents for labeling and dye removal. The dye carries a benzylguanine group that reacts with the SNAP-tag® of your protein of interest to form a covalent bond. The kit is optimized for protein concentrations of 10 µM. Just like all of our 2nd Generation labeling kits, it increases data quality and enables affinity studies with previously challenging targets by generating higher binding amplitudes and improved signal-to-noise ratios. RED dyes are suited for Monolith and Monolith NT.Automated instruments with a RED detector (Nano and Pico) and Dianthus NT.23 series. Contents require storage at 4 °C and -20 °C.

Monolith Explorer Kit - Mission to Mars
The goal of this mission is to get your assay development going. We’ve packed everything you’ll need to perform one independent labeling reaction for proteins and peptides with RED-NHS and RED-tris-NTA 2nd Generation dyes. Includes dyes, dye removal reagents, and 60 premium capillaries. Store contents at room temperature, 4 °C and -20 °C as required.

Large Volume Protein Labeling Kit RED-NHS 2nd Generation (Amine Reactive)
This Large Volume Protein Labeling Kit RED-NHS 2nd Generation kit increases data quality and enables affinity studies with previously challenging targets by generating higher binding amplitudes and improved signal-to-noise ratios. It contains all required reagents for labeling and dye removal. The dye carries a reactive NHS-ester group that reacts with primary amines (lysine residues) to form a covalent bond. The kit is optimized for proteins with a molecular weight higher than 5 kDa and concentrations between 2 and 20 µM. RED dyes are suited for Monolith NT.115 series and Monolith NT.Automated instruments with a RED detector (Nano and Pico) and Dianthus NT.23 series. Contents require storage at 4 °C and -20 °C.

Large Volume Protein Labeling Kit RED-MALEIMIDE 2nd Generation (Cysteine reactive)
This Large Volume Protein Labeling Kit RED-MALEIMIDE 2nd Generation kit increases data quality and enables affinity studies with previously challenging targets by generating higher binding amplitudes and improved signal-to-noise ratios. It contains all required reagents for labeling and dye removal. The dye carries a reactive maleimide group that reacts with cysteine residues to form a covalent bond. The kit is optimized for proteins with a molecular weight higher than 5 kDa and concentrations between 2 and 20 µM. RED dyes are suited for Monolith NT.115, Monolith NT.Automated instruments with RED detector (Nano and Pico) and Dianthus NT.23 series. Contents require storage at 4 °C and -20 °C.

Large Volume His-Tag Labeling Kit RED-tris-NTA 2nd Generation
This Large Volume His-Tag Labeling Kit RED-tris-NTA 2nd Generation kit increases data quality and enables affinity studies with previously challenging targets by generating higher binding amplitudes and improved signal-to-noise ratios. The kit is used for site-specific and purification-free labeling of His-tagged (6xHis) proteins and peptides. The kit can be used with purified as well as crude samples (e.g. cell lysate) and contains material sufficient for 3840 single-point MST measurements. RED dyes are suited for Monolith NT.115 and Monolith NT.Automated instruments with RED detector (Nano and Pico) and Dianthus NT.23 series. Store at -20 °C.

Buffer Exploration Kit
Your mission is to explore buffer conditions for biophysical interaction assays MST and TRIC, protein stability, purification, and storage. Start your exploration with this 96 deep-well plate containing 1 mL of each buffer condition per well.