Only the highest quality products
Ensuring that customers always have the best quality products is at the top of our list. We pay special attention to the capillaries—they’re manufactured in a state-of-the-art facility following the same stringent protocols used for diagnostic-grade capillaries and rigorously tested. With over 10 years of experience, we’re proud that our patented capillary technology minimizes undesirable effects to proteins, while delivering the quality and consistency associated with NanoTemper Technologies.
Prometheus NT.Plex nanoDSF Grade Standard Capillary Chips
2 x 8 Prometheus NT.Plex nanoDSF Grade Standard 24-Capillary Chips. Only for use with Prometheus NT.Plex
Prometheus NT.Plex nanoDSF Grade High Sensitivity Capillary Chips
High sensitivity capillary chips for protein concentrations below 200 µg/mL. 2 x 8 Prometheus NT.Plex nanoDSF Grade High Sensitivity 24-Capillary Chips. Only for use with Prometheus NT.Plex.
Prometheus NT.48 Series nanoDSF Grade Standard Capillaries
2x 200 Prometheus NT.48 Series nanoDSF Grade Standard Capillaries. Only for use with Prometheus NT.48.
Prometheus NT.48 Series nanoDSF Grade High Sensitivity Capillaries
High sensitivity capillaries for protein concentrations below 200 µg/mL. 1x 200 Prometheus NT.48 Series nanoDSF Grade High Sensitivity Capillaries. Only for use with Prometheus NT.48.
Capillary Sealing Paste
The Capillary Sealing Paste is a fast-drying, oil-based liquid rubber. It can be easily applied to capillary ends using the Capillary Sealing Applicators. The material is chemically inert, silicone-free and insoluble in water. Sealing of capillaries is only required for measurements that exceed 3 hours or when applying temperatures above 95 °C. 5 tubes, 20 mL each.
Capillary Sealing Applicators
The Capillary Sealing Paste Applicators seal up the capillary ends of up to 48 capillaries in parallel from both sides (2 pieces). The Capillary Sealing Paste can be used to seal single Prometheus NT.48 capillaries or Prometheus NT.Plex Capillary Chips.
The Capillary Remover is designed for removing capillaries from the Prometheus NT.48 instrument after the measurement in one scoop to minimize handling steps.
Capillary Chip Filling Station
Facilitates manual filling of capillary chips from microtiter plates or from individual tubes.